GPI Pro Universal Volt Mounting Plate for the Preston MDR2 and 3. Fits to the underside of the Volt Control box for mounting Preston 2 & 3, from the Pro Diving Board.
A female socket block which is used on vest bridge assembly for connecting vest & arm.
801-7291 is a kit for adaptation to an arm and vest upgrade ...
Lower your camera POV on your Steadicam with this Steadicam Low Mode Kit with F-Bracket and Handle Clamp.
Suitable for all Volt versions. M-Series, Volt-1.5 Gimbal . Shadow, Archer2, GPI Pro,
Betz Rig
Betz Rig
Volt Control Box Rod Mount 60mm x 15mm, For mounting the external Volt Control Box to 15mm bars ...
Exovest Screw - SCI-B012F1330
Ronin SC adapter usable with Steadimate-S system/adapters
Steadicam Rain Cover for Ultra 2 and Clipper 2 Stabilisation Systems (FGS-900160) ...
for Steadicam Docking Bracket (16 / 28.5mm)
4-Pin Hirose Split to 4-Pin XLR/BNC. Steadicam Monitor Cable for 7 inch HD Monitors (807-7510-02). Monitor cable for 7 inch HD monitors.
Hard Case with Padding for Arm and Vest 011-0330
Hard Case for Zephyr Sled only 011-0435.
This is a hard case for the Zephyr sled which is only to be used with the Tango system.
This is a hard case for the Zephyr sled which is only to be used with the Tango system.
Tally Sensor for Camera Stabilisation Systems (800-7930) ...
Anton Bauer Battery Mount - Small Dovetail (807-7350-02)...
works also with: Clipper 312, Clipper 324and Clipper 2 ...
The official Steadicam Baseball Cap ...
Arm Hanger Pin for use with the Steadicam Padded Docking Bracket. Attaches with 1/4-20" thread. Now with stainless steel pin, and suitable for smaller diameter arm hollow posts.
Replacement Pull Pin for \LX and Zephyr/Aero30 Vest.
Press fit. 1x supplied. *You will need a mechanical press or vice to install this item.
Press fit. 1x supplied. *You will need a mechanical press or vice to install this item.
Dust cap for the Steadicam Aero gimbal tilt adjusters. Aero Gimbal Dust Cap ( 4 piece ) - MSC-150268
Exovest Replacement Straps 815-7888
The Steadicam Assembly Weight - 1 lb can be attached directly to bottom of Archer2 or Zephyr rigs.
It is a 3-pin Lemo to 6-pin Lemo connector used with Archer, Clipper, and Flyer LE systems.
12 volt power cable
12 volt power cable
Lens height above Steadicam arm typically 575mm (22 5/8 inch). With the new Upside-Down adapter the Lens height is 395mm / 15 1/2 inches
We offer accessories for all rig systems from Steadicam. Ask us if you cannot find a part for your system in our shop. As an official dealer for Steadicam products, we offer the complete range.
