IDX IP-150/4SE - 4x IPL-150 battery & VL-4Se charger

Set includes:

4 x IPL-150 Batteries, 1 x VL-4SE Simultaneous Charger

IDX VL-4Se

Charger for the simultaneous charging of up to four ENDURA lithium-ion batteries

Characteristics:

The VL-4Se is a fully simultaneous 4-channel charger that is housed in a sturdy polycarbonate housing with a recessed power switch and handle. Each channel is operated independently, so batteries can be charged in any order and at any time.

Charge four batteries at the same time
Built-in handle
Light and robust
Compatible with all ENDURA V-mount batteries

Technical specifications:

Input voltage: 100 - 240 V AC, 50/60 Hz
Fast charging current: 2.7 A (4 batteries) / 3 A (1 - 3 batteries)
Fast charging system: Constant Current / Constant Voltage
Pre-charge current: 140-300 mA

General product information:

Dimensions (W x H x D): 156 x 153 x 288 mm
Weight: approx. 2.7 kg
Operating temperature: 0 ° to + 40 ° C
Power consumption: 220 VA max.

IDX IPL-150

Stackable V-mount battery with a capacity of 143 Wh, a voltage of 14.4 V, USB port and two D-Tap / Anton Bauer connections

Characteristics:

IDX presents the new IPL-98 and IPL-150 models (IDX Powerlink batteries). When they are "stacked" on the camera, power is taken from the rear battery instead of all of them at the same time, and it can be swapped out when it is discharged so that filming does not have to be interrupted. The transmission of digital data is supported and an inexpensive IDX battery such as the CUE-D150 can be "stacked" on the back of an IPL. Cinematographers and assistants will love the fact that up to 8 IPLs can be "stacked" on the VL-2000S two-channel charger. It is no longer necessary to get up at night and swap charged batteries for empty ones. A light, inexpensive charging option is also possible via the D-Tap Advanced connection. The battery pack offers a range of outputs which are USB and D-Tap and there is even a built-in V-Torch (LED flashlight) to help the user in the dark.

Technical specifications:

Capacity: 143 Wh / 9.9 Ah
Voltage: 14.4 V nominal / max. 16.8 V
Max. Discharge current: 11 A (14 A when connected)
Output power D-Tap: 80 W (per channel)
Output power USB: 5 V DC / 2.3 A
Final voltage: 11 V
Protective mechanisms: reverse charge, overcharge, overdischarge, overcurrent, temperature protection

General product information:

Weight: approx. 960 g
Charging temperature: 0 ° to + 40 ° C (+ 10 ° to + 30 ° recommended)
Discharge temperature: -20 ° to + 45 ° C (+ 10 ° to + 40 ° C recommended)
Storage temperature: -20 ° to + 50 ° C (for one month)