Flowcine Serene Spring Arm, biaxial spring arm for use with EasyRig

The Serene spring arm can carry between 6 and 20 kg of load. The fine-tuning of the spring tension can be carried out quickly and easily without tools. Of course, the spring arm also fits the Gravity One system, as well as with other gimbal platforms, Freefly Movi or BeSteady.

The FlowCine Serene is a two-axis spring arm that attaches to the end of the EasyRig Cinema 3. It stabilizes and compensates for the vibrations and movement errors on the vertical axis that arise from walking or running with the rig. The system also compensates for movement errors by counter-pivoting.

Recommended for combination with: Easyrig 5 Vario EASY-VG582A (13 cm arm extension)

Technical specifications

Dead weight: 1350 gr
Payload: 6 to 20 kg
Material: aluminum, stainless steel spring

Product information "FlowCine SERENE spring arm (f. Easyrig)"

The Serene is a patent pending two axis spring arm that attaches at the end of the Easyrig (2 / 2.5 / 3 or Vario5) arm. It stabilizes vibrations and motion errors on the vertical axis that comes from walking or running with the rig. It also stabilizes side to side errors in the same scenarios by counter pivoting around it's center axis. At the same time you have full use of the Easyrig cord extension that will allow you to go from high to low mode while at the same time the Serene will take care of the vertical and side to side stabilization adding two more stabilized axis to your existing system.

The Serene can take camera setups between 6-19.5 kg, and you can easily fine tune the spring tension without tool. Of course it works great with the Gravity One, but it also works really well for other gimbal rigs like the Freefly MoVI, DJI Ronin, Letus Helix and most other leading gimbal rigs.

FEATURES

Mounts on any Easyrig arm in the 2 / 2.5 / 3 and Vario4 / 5 series. (For rigs over 16 kg we recommend the Easyrig Standard upper arm and not the Medium + 130mm or Long + 230mm versions.)
Serene arm allows for a frictionless boom range of 180mm.
Easyrig cord passes through enabling high / low mode shooting.
Two springs cover the payload range of 6-19.5kg.
Totally reactive at both slow and fast walking / running sequences with push / pull forces of 800g to 1200g depending on the camera load and gimbal total weight.
Allows for further accessories like the Serene Extension arm.
Ships with new Easyrig cord and drilling template that fits all Easyrig 2 / 2.5 / 3 and Vario 4/5 support bars.