zubehör | accessories

Sort by:

Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
€37,50 *
* Excl. tax Excl. Shipping costs
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
€19,80 *
* Excl. tax Excl. Shipping costs
This is a DTAP to 2.1mm x 5.5mm barrel connector - center positive. The barrel connector is locking with a screw.
€49,00 *
* Excl. tax Excl. Shipping costs
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum ST4/ST4.3 or the M1/M2 motor ports of the Conductor SA2.6
€128,00 *
* Excl. tax Excl. Shipping costs
If you have a compatible DJI Gimbal (RS2 and RS3) and want an all inclusive setup, this kit adds eMotimo's iFootage Shark Slider + Integration kit with our direct drive motor.
€2.370,00 *
* Excl. tax Excl. Shipping costs
If you have a compatible DJI Gimbal (RS2 and RS3) and an unmotorized Dana Dolly, this kit adds eMotimo's Dana Dolly integration kit.
€1.990,00 *
* Excl. tax Excl. Shipping costs
The SA2.6 is a powerful motion controller for videographers and filmmakers. If you already own a DJI RS2 or RS3 gimbal, you can now easily combine it with linear motion and turntables to accomplish common motion control tasks.
€1.490,00 *
* Excl. tax Excl. Shipping costs
Already own a Spectrum ST4 and a Dana Dolly? The eMotimo Dana Dolly Integration Kit includes almost everything you need to motorize your Dana Dolly for your Spectrum. To motorize your kit, simply mount up the motor, belt clamps, belt, and your Spectrum.
€775,00 *
* Excl. tax Excl. Shipping costs
Already own a Spectrum ST4 and a Dana Dolly? The eMotimo Dana Dolly Integration Kit includes almost everything you need to motorize your Dana Dolly for your Spectrum. To motorize your kit, simply mount up the motor, belt clamps, belt, and your Spectrum.
€690,00 *
* Excl. tax Excl. Shipping costs
The SA2.6 is a powerful motion controller for videographers and filmmakers. If you already own a DJI RS2 or RS3 gimbal, you can now easily combine it with linear motion and turntables to accomplish common motion control tasks.
€1.375,00 *
* Excl. tax Excl. Shipping costs
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum.
€125,00 *
* Excl. tax Excl. Shipping costs
Geared motor mount, Motor & Pully for Dana Dolly ...
€175,00 *
* Excl. tax Excl. Shipping costs
Works with Select Kessler Crane Motors, this Kessler Crane Motor Mount allows for mounting elektraDrive, CineDrive, and Second ...
€158,00 *
* Excl. tax Excl. Shipping costs
the ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
€875,00 *
* Excl. tax Excl. Shipping costs
CL-UC1, Olympus connector supports:
CL-UC1, Olympus connector supports Olympus: E520 E510 E420 E410 E300,SP-570 UZ,SP-560 UZ,SP-550UZ,SP-510 UZ.
€24,50 *
* Excl. tax Excl. Shipping costs
CL-CB1, Olympus connector supports: Olympus: E1,E3,E10,E20,E30.
€24,50 *
* Excl. tax Excl. Shipping costs
CL-S1, Sony connector supports:

Sony a900, Sony a700, Sony a350, Sony a300, Sony a200, Sony a100, Sony a100K, a100,a77,a65,a57,a55,a37,a35,a33, a99
€24,50 *
* Excl. tax Excl. Shipping costs
Nikon CL-DC2 connector supports:

D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3100, D600, D610, D90, Z6, Z7
€24,50 *
* Excl. tax Excl. Shipping costs
Nikon CL-DC1 connector supports: Nikon D70, D80
€24,50 *
* Excl. tax Excl. Shipping costs
Nikon CL-DC0 (10-Pin) connector supports:

Nikon D1H, D1X, D2H, D2X, D2Xs, D2Hs, D200, D3, D4, D4s, D300, D700, D800, D810, D850, F90x, F90, F100, F6, F5 Kodak DCS-14n Fujifilm S3 Pro, S5 Pro
€24,50 *
* Excl. tax Excl. Shipping costs
Alpha a9, a7, a7 II, a7 III, a7R, a7R II, a7R III, a7S, a7S II, a6500, a6400, a6300, a6000, a5100, a5000, a3000, a77 II, a58
Cyber-shot RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II ...
€24,50 *
* Excl. tax Excl. Shipping costs
1DX Mark II, 1D X, 1D C, 1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5DS R, 5DS, 5D Mark IV, 5D Mark III, 5D Mark II, 5D, 50D, 40D, 30D, 20D, 10D, 6D Mark II, 6D, 7D Mark II, 7D
€24,50 *
* Excl. tax Excl. Shipping costs
This cable connects a WeMacro Rail Motor (not included) to an external motor port on your ST4/ST4.3. This cable is 4.9 feet in length.
€70,00 *
* Excl. tax Excl. Shipping costs
This is a custom cable that runs from the Spectrum ST4's i/o port to the Nodo Inertia Wheels Receiver (RX).
€55,00 *
* Excl. tax Excl. Shipping costs
* Excl. tax Excl. Shipping costs
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x