The SM7-PRO-3G also features a new internally developed communication protocol called XTBus that will allow you to connect new products in a dedicated network where they can share information and data.
Arm X1 can lift 32kg ( 70.4 lbs) with an ultimate maximum payload of 34kg (74.9 lbs).
V-Lock plate addon kit for SmartSystem monitor, It includes a jumper cable from DTAP to monitor ...
Professional gimbal with dual bearings configuration for every axis of rotation (TILT-ROLL-YAW ...
specifically designed for SM7 PRO 3G, it is possible to mount it on brackets that require central attachment under the monitor.
it matches perfectly the weight of the standard counterweight with the ability to precisely tuning the position of the outer bell increasing the momentum on the gimbal handle.
SMARTCAM Vest Lite for Select Camera Stabilizer Arm Systems, the lightest vest on the market: just 2.9kgs (6.4 lbs) ...
J-Bracket with 5/8" arm post designed for GPI® PRO Sled- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ....
J-Bracket with 5/8" arm post designed for steadicam® M2 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ...
Dual battery pack for Vlock Batteries with integrated electronics for Matrix Sleds
Multi-core CPU 6 sensors multi-axis digital level indicator, Powered via USB or pushpull connector with daisy chain possibility, Case milled from solid aluminum, shot-peened and hard anodized ..
Clearly visible under Sunlight, Equipped with a 7" Ultra Hyper Bright LCD panel with an outstanding brightness of up to 3200 nits and a native resolution of 1920 x 1200 with a contrast ratio of 1200:1
15mm high modulus Carbon Fiber rod.M8 male front threaded for a stable connection with Matrix Threaded bracket
NOTE : This product is composed by 1 single rod.
NOTE : This product is composed by 1 single rod.
The new SmartSystem SmartCAM TEMPO is an SDI splitter featuring a rugged aluminum design. It supports 12G SDI inputs, offers two SDI outputs, and has a built-in OLED screen to display signal information and diagnostic data ...
3Studs Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
Especially designed for Matrix R2 Lite in “Ronity” configuration
The ArmX1 Rain Cover is like a soft a comfy “blanket” for your Arm.
Monitor mount derived from SmartCAM Matrix Extreme Sled
The XTDongle enables seamless connectivity between PCs or Macs and any XTBus-compliant device, allowing you to fully utilize the new port capabilities.
J-Bracket with 5/8" arm post designed for GPI® PRO Sled- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ....
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Docking rings for Matrix sled compatible with Matrix Sled Docking Bracket only.
V-lock Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
LCD Bracket (Lateral mount) with Standard Matrix Rods Attachment ...
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
