The HV-320B is a 28V B-Mount battery designed for high voltage cine cameras such as the Arri Alexa 35.
REAR WAIST - Part Nr. 815-7818
Fits on any 28mm lightstand. The bottom side is provided with a 16mm pin adapter hole. Note: Only this spigot can be used for the Tango System. Other spigots will cause damage to your Tango slider system.
This is a DTAP to 2.1mm x 5.5mm barrel connector - center positive. The barrel connector is locking with a screw.
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Universal Vest Knobs M6 with rounded tips. Stainless steel knobs with round tips to avoid dent on Industry standard mating block.
The eMotimo Spectrum ST4 is a motion control pan and tilt head. The Spectrum is an advanced 4-axis motion controller for cinematography and photography that is faster, more accurate, and easier to use than anything else on the market.
801-7291 is a kit for adaptation to an arm and vest upgrade ...
The Tiffen 49mm Smoque 3 Filter is a unique diffusion filter that provides a smoky, hazy quality to your images, emulating the effects of a smoke or fog machine.
Produces a Smoky, Hazy Effect, Eliminates the Need for Artificial Smoke, ColorCore Technology ...
Creates Glowing Highlights, Softens Skin Details, Sparkle Appearance for Added Confidence, ColorCore Glass ...
All new, re-designed pulley wheel for the Steadicam Volt enabled gimbal. Reinforced and lower profile side walls.
Monitor rods with clamp designed to fit 1.75" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Bracket specifically design to grant a stable and vibration-free connection between Volt® Brain and Matrix top stage ...
With this kit, it is possible to transform the standard ArmX1 Arm Post into a free-spinning friction-less Arm Post ...
ZUDs convert 1/4 20" or 3/8 16" bolts into 15mm rods to fit Zacuto Z-Release components such as Z-Mount, 15mm Z-Locks, ZicroMount and all other Zacuto 15mm locking devices
The GLINK 1.5 is a new type of gimbal body support system that is made to work with electronic gimbals such as the Freefly systems M10, M15, MoVI Pro and the DJI Ronin 2
compact and light flight case (type Pelicase) for M-1 & M-2 sled with laser-cut compartment in solid foam ...
This is the ultimate bundle, the xARM and the xR3ACH. The xARM, being one of the smoothest arms on the market, and the added boom range and isolation of the xR3ACH will ensure a super smooth ride ready to take on almost any shot.
Capture professional, smooth camera movements by flying your rig with the xSPINE Vest, Front Mount, and xARM Stabilization System from FLOWCINE. The camera's weight is distributed to the shooter's torso ...
xSPINE Support Vest for All Body Sizes, xR3ACH Heavy-Duty Stabilization Arm, Front Mount for xSPINE, xR3ACH Comes in Regular Left-Side Setup
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum.
Geared motor mount, Motor & Pully for Dana Dolly ...
The Battery cable for Anker 2nd Gen Astro Pro2 20000mAh is a 2.1mm to 1.7mm barrel connector battery cable. This cable connects from the Anker 2nd Gen Astro Pro2 20000mAh to the TB3 or Spectrum. It is 18 inches in length.
