Sale
EC-H90/2X - Bundle : 2x CUE-H 90 + 1x VL-2X Charger
It is a 3-pin Lemo to 6-pin Lemo connector used with Archer, Clipper, and Flyer LE systems.
12 volt power cable
12 volt power cable
Accessory Type: Counterweight / Middle Weight with O-Ring for Stabilisation Systems
Steadicam 12-inch G-70 Gimbal Arm Post for Ultra and Clipper Stabilisation Systems (800-7204-01) ...
Lens height above Steadicam arm typically 575mm (22 5/8 inch). With the new Upside-Down adapter the Lens height is 395mm / 15 1/2 inches
Spectrum ST4 Motion Control Pan & Tilt Head (V-Mount)
Lemo5 to Lemo2- power cable
This 906TS0160 Cable from Transvideo features a 4-pin Hirose connector on one end, and a 4-pin XLR male connector on the other.
Transvideo Features a 6-pin Hirose connector on one end, and a 4-pin XLR female and BNC connectors on the other. Hirose 6 to XLR4-F & BNC - Sled ZEPHYR to monitor.
Lemo3 to Pag Jack - Steadicam Clipper II (12V)
3-Pin LEMO to Pag Jack 12V Power Cable for Steadicam Clipper
Fisher4 to Hirose6-F
Fisher4 to Hirose4 & BNC - Split Cable for Starlite
Fisher4 to Lemo2 & BNC - Split Cable for Starlite on Panavision
Fisher4 to Lemo6 & BNC - Split Cable for Starlite
Fisher4 to D-Tap & BNC - Split Cable for Starlite on Sony
Fisher4 to RS3 & BNC - Split Cable for Starlite on Arri
Fisher4 to XLR4-F & BNC - Split Cable for Starlite
Key Features
For StarliteHD Monitor
Provides Power & Composite Video
4-Pin Fischer to 4-Pin XLR & BNC
The 23.6" 4-Pin Fischer to 4-Pin XLR & BNC Breakout Cable from Transvideo is designed to provide power and composite video signal to the StarliteHD
For StarliteHD Monitor
Provides Power & Composite Video
4-Pin Fischer to 4-Pin XLR & BNC
The 23.6" 4-Pin Fischer to 4-Pin XLR & BNC Breakout Cable from Transvideo is designed to provide power and composite video signal to the StarliteHD
Fisher4 to XLR4-M & BNC - Split Cable for Starlite
Fisher4 To Fisher4 - Starlite To ARRI Minimonitor Cable
Key Features
10-Pin Hirose to 6-Pin Hirose
Provides Power & Composite
Steadicam Clipper & Ultra Application
The coiled 19.6 to 27.5" 10-Pin Hirose to 6-Pin Hirose Cable from Transvideo is designed to connect the CineMotor IIIA to the Steadicam Clipp
10-Pin Hirose to 6-Pin Hirose
Provides Power & Composite
Steadicam Clipper & Ultra Application
The coiled 19.6 to 27.5" 10-Pin Hirose to 6-Pin Hirose Cable from Transvideo is designed to connect the CineMotor IIIA to the Steadicam Clipp
Hirose10 to Lemo8 - CineMonitorIII to Pro
