CF RING FOOT 3 feet - g-Foot-3
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Holds GLINK Upright without Stand, 1/4"-20 and 3/8"-16 Female Threads, Clamps to Bottom CF Ring, Designed for GLINK Stabilization System ...
GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units assembled together servers as the main support ring for connecting to the rest of the GLINK system.
GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units assembled together servers as the main support ring for connecting to the rest of the GLINK system.
GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units assembled together servers as the main support ring for connecting to the rest of the GLINK system.
CF RING FOOT 1 foot - g-Foot-1
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Feet for your CF Ring, to be able to put down your rig without a docking stand.
The xARM is based on polymer spring cores with a outer shell of Neoprene. Each spring core has a smooth and linear lifting capacity and when being used near their maximum ...
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
The xDROP, is a new male socket block-to-female socket block connection bracket, that drops the arm connection to the vest approx 85mm or 3.4″ and offsets the same connection to the side 55mm or 2.2″.
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
The xSOCKET, is a universal female socket block that works on all universal Steadicam type vests, such as Tiffen(R) Exovest, GPI PRO(™) vests and all universal socket block Steadicam type arms.
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm.
The xPEG Rip-Tie allows the operator to tighten up the arm at the bottom shelf of the cart.
The xPEG Rip-Tie allows the operator to tighten up the arm at the bottom shelf of the cart.
Replacement camera mounting pin for camera mounting plate assembly (601-7412 and 802-7417). The pin screw is compatible with Clipper 2, Clipper, Vector and Archer_2S.
Compatible withClipper 2, Clipper, Vector, Archer_2S
Compatible withClipper 2, Clipper, Vector, Archer_2S
Tranquilizer O-ring pack shore 20
Black Arm Tranquilizer Shore Pack 20 (12-23 lb)
Black Arm Tranquilizer Shore Pack 20 (12-23 lb)
Black Arm Tranquilizer Shore Pack 30 (14-29 lb)
BLK-TRANQ-ORING-PACK-30
BLK-TRANQ-ORING-PACK-30
Stub Mount for Black Arm Dampening System
Black Standard to Complete - Blk-Std-to-Cmpl
The Black Mitchell Nut is a Mitchell castle nut that is more narrow than most castle nuts, making it fit through the rods of our Female Mitchell mount.
The Black Pro Clamp Dual links together 48-51mm tubes to build your desired rig. Maximum 500KG load weight. All Pro Clamps are german TUV certified.
Dana Dolly Monitor Mount for Dana Dolly (p/n DDMM1). Adjustable monitor mount for small monitors 5lbs and under. Threaded 3/8" stud goes into available hole in Dana Dolly and secures with a wingnut.
150mm adapter for large camera heads that use a 150mm ball base for leveling. This is a quality, made in USA product that will also fit other standard Mitchell Mounts.
150mm adapter for large camera heads that use a 150mm ball base for leveling. This is a quality, made in USA product that will also fit other standard Mitchell Mounts.
The xMOUNT Mitchell adapter is a 50mm tube adapter, that is made with the exact height of the xMOUNT to allow a small and tight package that can be mounted on standard female mitchell.
Sale
2 x DUO-C150P Batteries, 1 x VL-2000S Simultaneous Charger with 4 pin XLR DC Output (100W)
