U-Bracket designed to be compatible with steadicam® M1 gimbalIt let you increase the distance from the arm post and the Sled handle ...
Ultra rigid Hard mount compatible with every stabilizer arm based on the industry standard mating block. Hard Mount with Mitchell and Tube Attachment - SKU: 000007111
Professional gimbal with dual bearings configuration for every axis
MATRIX DOVETAIL CAMERA PLATE [STANDARD], Length : 6.7inches (170mm)
The ArmX1 Rain Cover is like a soft a comfy “blanket” for your Arm.
ARM POST 5/8IN – STICK OUT 190MM / 7.5IN
MONITOR MOUNT W/RODS (40MM / 1.575″ POST
The XTDongle enables seamless connectivity between PCs or Macs and any XTBus-compliant device, allowing you to fully utilize the new port capabilities.
it matches perfectly the weight of the standard counterweight with the ability to precisely tuning the position of the outer bell increasing the momentum on the gimbal handle.
Additional Chest pad compatible with Vest Lite.Washing machine proof
Monitor rods with clamp designed to fit 1.5" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.37" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Vlock plate addon kit for SmartSystem monitors: SM7-3K and SM7-3K-Z
Reduce to zero the play of the yaw axis when the in-built Ronin2 locking system is engaged.
Equipped with Gimbal lock (including retaining pin)
Plastic Gimbal
5/8" pin to balance your Sled
Support for vest
Support for Arm
Plastic Gimbal
5/8" pin to balance your Sled
Support for vest
Support for Arm
![Smartsystem Matrix Dovetail Camera Plate [Long – 13inches] - 000008285 +](https://cdn.webshopapp.com/shops/268760/files/393517830/510x700x2/smartsystem-matrix-dovetail-camera-plate-long-13in.jpg)
Long Dovetail camera plate for Matrix Sleds, Length : 13 inches (330mm)
ARM POST 1/2IN – STICK OUT 40MM / 1.5IN
3Studs plate addon kit for SmartSystem monitor. It includes a jumper cable from DTAP to monitor.
It minimize the oscillation of Zen due to improper installation granting a more stable behavior especially on low mode.
Compatible with all ArmX1 ever manufactured, it can let you mount the J-Bracket or U-Bracket (regular or upside-down) lower than 254mm / 10", respect standard ArmPost.
V-Lock plate addon kit for SmartSystem monitor, It includes a jumper cable from DTAP to monitor ...
15mm high modulus Carbon Fiber rod.M8 male front threaded for a stable connection with Matrix Threaded bracket
NOTE : This product is composed by 1 single rod.
NOTE : This product is composed by 1 single rod.
Docking rings for Matrix sled compatible with Matrix Sled Docking Bracket only.
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
