U-Bracket designed to be compatible with GPI® PRO Sled gimbalIt let you increase the distance from the arm post and the Sled handle giving to you more headroom to install your preferred monitor on this last one
Professional gimbal with dual bearings configuration for every axis
Technical Note : In case of emergency, it can be replaced with a commercial knob with M6 x10 threading
![Smartsystem Matrix Dovetail Camera Plate [Long – 13inches] - 000008285 +](https://cdn.webshopapp.com/shops/268760/files/393517830/350x298x2/smartsystem-matrix-dovetail-camera-plate-long-13in.jpg)
Long Dovetail camera plate for Matrix Sleds, Length : 13 inches (330mm)
A fully insulated Rain Suit for ArmX1.
The ArmX1 Rain Cover is like a soft a comfy “blanket” for your Arm.
ARM POST 5/8IN – STICK OUT 190MM / 7.5IN
MONITOR MOUNT W/RODS (40MM / 1.575″ POST
V-Lock plate addon kit for SmartSystem monitor, It includes a jumper cable from DTAP to monitor ...
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Docking rings for Matrix sled compatible with Matrix Sled Docking Bracket only.
Additional Chest pad compatible with Vest Lite.Washing machine proof
Monitor rods with clamp designed to fit Matrix sled posts (1.57" / 40mm)The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 2.00" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.75" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.5" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.37" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
V-lock Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
3Studs Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
LCD Bracket (Lateral mount) with Standard Matrix Rods Attachment ...
With this kit, it is possible to transform the standard ArmX1 Arm Post into a free-spinning friction-less Arm Post ...
Standard Mating block, in bundle with every ArmX1, industry standard compatible. Made in 7075 Ergal aluminum, shot peened and hard anodized.
comes with: 15mm carbon fiber rods with embedded battery joint, Locking knob, Nylon washer
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
