Clearly visible under Sunlight, Equipped with a 7" Ultra Hyper Bright LCD panel with an outstanding brightness of up to 3200 nits and a native resolution of 1920 x 1200 with a contrast ratio of 1200:1
3Studs plate addon kit for SmartSystem monitors: SM7-3K and SM7-3K-Z
The SM7-PRO-3G also features a new internally developed communication protocol called XTBus that will allow you to connect new products in a dedicated network where they can share information and data.
J-Bracket with 5/8" arm post designed for steadicam® M2 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ...
Arm X1 can lift 32kg ( 70.4 lbs) with an ultimate maximum payload of 34kg (74.9 lbs).
Multi-core CPU 6 sensors multi-axis digital level indicator, Powered via USB or pushpull connector with daisy chain possibility, Case milled from solid aluminum, shot-peened and hard anodized ..
SMARTCAM Vest Lite for Select Camera Stabilizer Arm Systems, the lightest vest on the market: just 2.9kgs (6.4 lbs) ...
Compatible with all ArmX1 ever manufactured, it can let you mount the J-Bracket or U-Bracket (regular or upside-down) lower than 254mm / 10", respect standard ArmPost.
Available on backorder, the first delivery is planned for May, Delivery depending on order receipt/date.
Dual battery pack for Vlock Batteries with integrated electronics for Matrix Sleds
Extremely light and compact: it’s one of the smallest and lightest stabilizer arm in the market (only 45mm / 1.77″of width) ...
J-Bracket with 5/8" arm post designed for GPI® PRO Sled- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ....
compatible with: SmartSystem X1, PRO® GPI® Titan® and Atlas®, FlowCine® XArm®, Steadicam arms with 5/8 arm post ...
Monitor mount derived from SmartCAM Matrix Extreme Sled
compatible with: SmartSystem X1, PRO® GPI® Titan® and Atlas®, FlowCine® XArm®, Steadicam arms with 5/8 arm post ...
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
LCD Monitor Attachment derived from Matrix Sled.
3Studs plate addon kit for SmartSystem monitor. It includes a jumper cable from DTAP to monitor.
specifically designed for SM7 PRO 3G, it is possible to mount it on brackets that require central attachment under the monitor.
The new SmartSystem SmartCAM TEMPO is an SDI splitter featuring a rugged aluminum design. It supports 12G SDI inputs, offers two SDI outputs, and has a built-in OLED screen to display signal information and diagnostic data ...
Monitor rods with clamp designed to fit 1.37" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Bracket specifically design to grant a stable and vibration-free connection between Volt® Brain and Matrix top stage ...
3Studs Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
With this kit, it is possible to transform the standard ArmX1 Arm Post into a free-spinning friction-less Arm Post ...
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
