eMotimo

Sort by:

The SA2.6 is a powerful motion controller for videographers and filmmakers. If you already own a DJI RS2 or RS3 gimbal, you can now easily combine it with linear motion and turntables to accomplish common motion control tasks.
€1.490,00 *
* Excl. tax Excl. Shipping costs
Use the USB to I/O port cable for spectrum ST4 to connect your spectrum to Dragonframe desktop software.
€58,00 *
* Excl. tax Excl. Shipping costs
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
€37,50 *
* Excl. tax Excl. Shipping costs
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum ST4/ST4.3 or the M1/M2 motor ports of the Conductor SA2.6
€128,00 *
* Excl. tax Excl. Shipping costs
The SA2.6 is a powerful motion controller for videographers and filmmakers. If you already own a DJI RS2 or RS3 gimbal, you can now easily combine it with linear motion and turntables to accomplish common motion control tasks.
€1.375,00 *
* Excl. tax Excl. Shipping costs
eMotimo spectrum ST4 Run & Gun Bundle, smallest and lightest 4-axis bundle ...
€3.790,00 *
* Excl. tax Excl. Shipping costs
If you have a compatible DJI Gimbal (RS2 and RS3) and an unmotorized Dana Dolly, this kit adds eMotimo's Dana Dolly integration kit.
€1.990,00 *
* Excl. tax Excl. Shipping costs
Sale
Spectrum ST4 Run & Gun Bundle - ST417_RG_VM_14 : 14:1 Motor
€3.790,00 €3.590,00 *
* Excl. tax Excl. Shipping costs
The Battery cable for Anker 2nd Gen Astro Pro2 20000mAh is a 2.1mm to 1.7mm barrel connector battery cable. This cable connects from the Anker 2nd Gen Astro Pro2 20000mAh to the TB3 or Spectrum. It is 18 inches in length.
€29,00 *
* Excl. tax Excl. Shipping costs
Movement: ST4 - 4 axis motion controller - Pan/Tilt/Focus and Slide on Dana Dolly
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
€4.490,00 *
* Excl. tax Excl. Shipping costs
iFootage Shark Slider S1 + Motor Pod Bundle, MAC_SK_DD - Direct Drive Motor
€1.095,00 *
* Excl. tax Excl. Shipping costs
MAC_SMC_EXT35 - Spectrum Motor Extension Cable - 3.5FT
€28,50 (€48,00 / ) *
* Excl. tax Excl. Shipping costs
LRT Pro Timer is a small and light intervalometer with a build-in Li-Ion Battery that can be charged via USB and holds up to 20 hrs.
€298,00 *
* Excl. tax Excl. Shipping costs
Replacement ST4 Remote USB Dongle: This is a replacement USB Bluetooth module that's compatible with the Spectrum ST4.
€27,50 *
* Excl. tax Excl. Shipping costs
Spectrum ST4 Pro Pan/Tilt Head with Portable Dana Dolly Kit (V-Mount) ...
€5.150,00 *
* Excl. tax Excl. Shipping costs
Sale
The eMotimo Turntable is the perfect tool for any any photographer or cinematographer to add to their kit. Great for fashion, food, product, stop-frame, and many more styles of shooting.
€425,00 €395,00 *
* Excl. tax Excl. Shipping costs
This is a DTAP to 2.1mm x 5.5mm barrel connector - center positive. The barrel connector is locking with a screw.
€49,00 *
* Excl. tax Excl. Shipping costs
If you have a compatible DJI Gimbal (RS2 and RS3) and want an all inclusive setup, this kit adds eMotimo's iFootage Shark Slider + Integration kit with our direct drive motor.
€2.370,00 *
* Excl. tax Excl. Shipping costs
eMotimo spectrum ST4 Run & Gun Bundle, smallest and lightest 4-axis bundle ...
€3.840,00 *
* Excl. tax Excl. Shipping costs
Already own a Spectrum ST4 and a Dana Dolly? The eMotimo Dana Dolly Integration Kit includes almost everything you need to motorize your Dana Dolly for your Spectrum. To motorize your kit, simply mount up the motor, belt clamps, belt, and your Spectrum.
€775,00 *
* Excl. tax Excl. Shipping costs
Alpha a9, a7, a7 II, a7 III, a7R, a7R II, a7R III, a7S, a7S II, a6500, a6400, a6300, a6000, a5100, a5000, a3000, a77 II, a58
Cyber-shot RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II ...
€24,50 *
* Excl. tax Excl. Shipping costs
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
€4.190,00 *
* Excl. tax Excl. Shipping costs
Movement: ST4 - 4 axis motion controller - Pan/Tilt/Focus and Slide on Dana Dolly
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
€4.490,00 *
* Excl. tax Excl. Shipping costs
The eMotimo Spectrum ST4.3 is our recently released upgraded version that adds our new expansion port. The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
€3.090,00 *
* Excl. tax Excl. Shipping costs
* Excl. tax Excl. Shipping costs

Mission Statement

eMotimo is a small, passionate, hands-on company, driven to create the highest-value camera products on the market. We enable photographers and cinematographer of all levels, to produce their visions and capture their moments in motion!

History

eMotimo was inspired by techniques used in the filming of the documentary series, Planet Earth. How’d it all start? The founder, Brian, who has a strong background in photography and engineering, wanted to produce similar shots himself, but the technology and products on the market were too expensive and difficult to use. He set out to make his own.  eMotimo was born in 2010 and sold its first eMotimo PT in January 2011.

Values

We put a ton of our energy into creating our high-value, feature-heavy products.  We deliver what we promise.  We care deeply about customer service and the success of our users.   Our commitment to our community is long term.  We care about participation and work to have a voice in the camera/film/broadcast community.  We want to be a part of your kit – without ever locking you into a brand.  We focus on integration with other vendors.

Build quality

All eMotimo products are designed, assembled, and run through QA in our San Diego headquarters before they are shipped to you. We take a tremendous amount of pride in the quality of our products.  By assembling and testing them in our own shop, we can pay close attention to each and every part that goes out our door.

Future

We will continue to make products that push the camera/video/broadcast industry forward.  We are a team of creatives, inspired by creatives.  We are constantly evaluating new ideas and innovations to bring to our customers. We hope our products will continue to mix up the industry and enable users of all levels to do amazing things.

 

Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x