Key Features
- xSPINE Support Vest for All Body Sizes
- xR3ACH Heavy-Duty Stabilization Arm
- xARM Articulated Stabilization Arm
- xR3ACH Comes in Regular Left-Side Setup
Create smooth movements and stabilize your footage with the xSPINE + xR3ACH Regular + xARM Bundle from FLOWCINE. The bundle includes the xSPINE stabilizer vest, the xR3ACH stabilizer arm in regular setup, and the xARM double-section stabilization arm.
The adjustable vest fits just about any body size and supports loads from 37 to 64 lb. The xR3ACH arm mounts on the left side of the vest and connects the xARM to provide stability and mobility for your camera rig when performing handheld motion shots. Cases are included with the components to store and transport the bundle.
FLOWCINE xSPINE Vest and xR3ACH Regular Bundle
Capture professional, smooth camera movements by flying your rig with the xSPINE Vest and xR3ACH Regular Bundle from FLOWCINE. The camera's weight is distributed to the shooter's torso, and the spring cores of the articulating stabilization arm enable your rig to float through the set, creating an immersive experience for the audience as it follows your subject through the scene.
The xSPINE fits all body types and allows you to support a stabilizer rig and save stress on the back and shoulders. The included xR3ACH arm provides a support arm for other stabilizers, and it also can be used as a stabilizer arm on its own. It includes three swappable spring cores to support loads from 37 to 64 lb, and there are small, medium, and large middle brackets included to finely adjust the mounting block position. A carry case with custom-cut foam is included to store the components.
Vest Mounting Options
The xSPINE is built to be able to take a wide range of accessories and mounting options. There are multiple mounting options for the following products and accessories:
- FLOWCINE xBONE CF back mount
- FLOWCINE xR3ACH (with xSPINE mount)
- FLOWCINE xBONE (with xSPINE mount)
- FLOWCINE front mount
- FLOWCINE GLINK
Size Adjustments
The xSPINE has adjustments for all kinds of body sizes. The shoulders and sides have telescoping adjustments that can be set so they fit both larger and smaller operators. Both front and back can quickly be adjusted in height.
xR3EACH Features
Large range of different lifting capacities in one single arm section
Regular mounting on the left side of the operator
15.3" boom range
Arm weighs up to 9.9 lb depending on the middle bracket used (small, medium, and large included)
Frictionless and noiseless design
Easy to tune and easy to maintain
All tools needed are included
Ships with three spring cores for a range between 37 to 64 lb
Ships in a Peli AIR 1555 case with custom foam
FLOWCINE xARM Double-Section Articulated Stabilization Arm
Add a heavy-duty stabilization arm to your vest and gimbal rig with the xARM Double-Section Articulated Stabilization Arm from FLOWCINE to achieve smooth, professional motion shots. The xARM features a frictionless, noiseless, spring-loaded design that takes minimal force to adjust.
The xARM has multiple points of articulation in its two sections that can be adjusted with the included tools. Its full boom extension range is 30.7". The arm ships with three neoprene-lined, swappable spring cores that can support different load capacity ranges so you can balance your rig with the least amount of force: the blue core supports 37 to 49.5 lb, the orange core supports 44.5 to 56 lb, and the purple core supports 52 to 64 lb.
The arm's components are made of a combination of stainless steel, aluminum, titanium, and carbon fiber for a durable construction, and they also keep the arm lightweight at approximately 11 lb. Universal mounting socket blocks are included to mount onto various vests and rigs, and arm posts are also included to mount Tiffen and PRO standard gimbals.
All the tools required to assemble and adjust the arm are included, and a hard case with custom-cut foam is provided to store and transport your xARM.
Spring-loaded, double-section articulated stabilization arm
Frictionless, noiseless design
Three sets of spring arms included providing load capacity range of 37 to 64 lb
Up to 30.7" boom range
Three lightweight titanium arm posts for Tiffen and PRO gimbals included
Hard-shell case with custom-cut foam and tool set included
In the Box
- FLOWCINE xSPINE Vest and xR3ACH Regular Bundle
- FLOWCINE xSPINE Vest
- xR3ACH Stabilizer Arm (Regular)
- Blue Spring Core (37 to 49.5 lb)
- Orange Spring Core (44.5 to 56 lb)
- Purple Spring Core (52 to 64 lb)
- Small Middle Link Bracket
- Medium Middle Link Bracket
- Large Middle Link Bracket
- 4-Point Tool
- Ratchet Wrench
- Hex T-Handle
- Bottle of Maintenance Fluid
- Peli AIR 1555 Case with Custom Foam
- FLOWCINE xARM Double-Section Articulated Stabilization Arm
- Front Socket Block
- Back Socket Block
- 3 x Arm Posts
- 2 x Blue Spring Cores
- 2 x Orange Spring Cores
- 2 x Purple Spring Cores
- Wrench Kit
- Peli AIR 1605 Case with Custom Foam
