2er Pack Lithium-Ionen CUE-H180 V-Mount Akku mit 180 Wh und ein VL-2X 2-Kanal Ladegerät
The xPEG Babypin is a hook that you can attach wherever there is a baby pin, where you can hang your Steadicam arm.
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
Send tally status to your Steadicam monitor when it is installed on a Steadicam sled with this Tally Cable with Sensor and Repeater from Steadicam.
Arm Post Size 6" to 3/4" Top - 800-7204
Arm Post - Size: 12" to 1/2" Top - 800-7204-05
QUICK RELEASE HOOK - Pup-QuickRelease
Riser 80 mm - HY-IV4194_80, Hybris Zubehör
5” OLED 3G/HD/SD - SDI Monitor-Recorder Touch-screen intuitive interface With ARRI camera interface
Working base for fix focus lenses, to have a stable stand with the rear or front of LPL-Mount lens | Ø 80 | 87 | 95 | 110| 114mm
Replacement thumbscrew for all standard sized sock blocks ...
AXIS Component: AXIS Stand
Rough ground, gravel and electrical cords are a worry of the past.
Dana Dolly T Tool.
Item #: DDTTOOL1
Dimensions 6 × 6 × 6 cm
Weight 1 kg
Item #: DDTTOOL1
Dimensions 6 × 6 × 6 cm
Weight 1 kg
Longer handle for Steadicam M1 gimbal, adding an additional 1" to standard length.
Suitable for 3/4" Arm posts. *Allow 7 days for dispatch.
Suitable for 3/4" Arm posts. *Allow 7 days for dispatch.
Replacement Pull Pin for \LX and Zephyr/Aero30 Vest.
Press fit. 1x supplied. *You will need a mechanical press or vice to install this item.
Press fit. 1x supplied. *You will need a mechanical press or vice to install this item.
Portable Dolly System w/ Universal Track Ends - 75mm & 100mm Bowl Adapters
The Dana Dolly Portable Camera Slider is the same dolly found in all of the Original (Non-Hi Hat) kits ...
Portable Dolly System w/ Original Track Ends - 75mm & 100mm Bowl Adapters
Removable Mitchell Plate Hi Hat, Mitchell Plate to 100mm Bowl Adapter, Anti-Tip Brackets, Soft Polyurethane Track Wheels ...
The ArmX1 Rain Cover is like a soft a comfy “blanket” for your Arm.
Monitor mount derived from SmartCAM Matrix Extreme Sled
to use the Cheese Plate to attach something besides the Sony Venice camera ...
