Monitor rods with clamp designed to fit 1.75" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
V-lock Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
Additional bracket for Matrix Sled for a safe and decoupled connection for low mode monitor.Compatible only with M8 d.15 threaded carbon fiber rods.Distance Center-to-Center = 60mmNOTE: no rods are included in this package
LCD Bracket (Lateral mount) with Standard Matrix Rods Attachment ...
ArmX1 arm post with 1/2″ diameter and stickout of 140mm / 5.5″
With 368grams / 0.82 lbs, made with S31803 Duplex stainless steel, it grants ultimate strength and fatigue durability.
Standard Mating block, in bundle with every ArmX1, industry standard compatible. Made in 7075 Ergal aluminum, shot peened and hard anodized.
J-Bracket with 5/8" arm post designed for steadicam® M1 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® - ...
U-Bracket designed to be compatible with steadicam® M2 gimbalIt let you increase the distance from the arm post and the Sled handle ...
U-Bracket designed to be compatible with GPI® PRO Sled gimbalIt let you increase the distance from the arm post and the Sled handle giving to you more headroom to install your preferred monitor on this last one
Counterweight plate with 10x counterweights included specifically designed
Professional gimbal with dual bearings configuration for every axis of rotation (TILT-ROLL-YAW ...
Technical Note : In case of emergency, it can be replaced with a commercial knob with M6 x10 threading
Designed for Carbon rods with a diameter of 15mm, Center-to-center distance : 100mm
Especially designed for Matrix R2 Lite in “Ronity” configuration
compatible with: SmartSystem X1, PRO® GPI® Titan® and Atlas®, FlowCine® XArm®, Steadicam arms with 5/8 arm post ...
Dual battery pack for 3Studs Batteries with integrated electronics ...
C-BATTERY V-LOCK MOUNT W/ ADAPTER
A fully insulated Rain Suit for ArmX1.
ARM POST 5/8IN – STICK OUT 90MM / 3.5IN
ARM POST 5/8IN – STICK OUT 40MM / 1.5IN
ARM POST 3/4IN – STICK OUT 90MM / 3.5IN
ARM POST 3/4IN – STICK OUT 40MM / 1.5IN
Monitor mount derived from SmartCAM Matrix Extreme Sled
SmartSystem produces professional Stabilizers, X1 Arm, advanced Motion Control for Film Makers and Video Makers, Camera Slider, Camera Dollies ...
