eMotimo

Sortieren nach:

Power your spectrum ST4 with the 12 Volt AC Adapter. This adapter is 12 volts with a barrel connector size of 2.1mm x 5.5mm x 12mm.
€48,50 *
* exkl. MwSt. zzgl. Versandkosten
Use the Wide Open Camera Focus Ring to add a lens gear to your lenses that ...
€38,00 *
* exkl. MwSt. zzgl. Versandkosten
V Mount Upgrade and Retrofit - POW_VMUR
€325,00 *
* exkl. MwSt. zzgl. Versandkosten
works with Rhino network motor cables and the eMotimo spectrum ...
€64,00 *
* exkl. MwSt. zzgl. Versandkosten
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
€37,50 *
* exkl. MwSt. zzgl. Versandkosten
If you have a compatible DJI Gimbal (RS2 and RS3) and want an all inclusive setup, this kit adds eMotimo's iFootage Shark Slider + Integration kit with our direct drive motor.
€2.370,00 *
* exkl. MwSt. zzgl. Versandkosten
If you want to drive the DJI gimbals for automated interviews/Product shooting, and already own a compatible slider and eMotimo integration kit, then this the kit you want.
€1.490,00 *
* exkl. MwSt. zzgl. Versandkosten
The Battery cable for Anker 2nd Gen Astro Pro2 20000mAh is a 2.1mm to 1.7mm barrel connector battery cable. This cable connects from the Anker 2nd Gen Astro Pro2 20000mAh to the TB3 or Spectrum. It is 18 inches in length.
€29,00 *
* exkl. MwSt. zzgl. Versandkosten
the ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
€875,00 *
* exkl. MwSt. zzgl. Versandkosten
Nikon CL-DC2 connector supports:

D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3100, D600, D610, D90, Z6, Z7
€24,50 *
* exkl. MwSt. zzgl. Versandkosten
This is a custom cable that runs from the Spectrum ST4's i/o port to the Nodo Inertia Wheels Receiver (RX).
€55,00 *
* exkl. MwSt. zzgl. Versandkosten
Movement: ST4 - 4 axis motion controller - Pan/Tilt/Focus and Slide on Dana Dolly
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
€4.490,00 *
* exkl. MwSt. zzgl. Versandkosten
5:1: Fast enough for video but can't do slopes - Good for interviews ...
€125,00 *
* exkl. MwSt. zzgl. Versandkosten
mac_smcEfficient Planetary Gear Drive 8mm mounting shaft ...
€128,00 *
* exkl. MwSt. zzgl. Versandkosten
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum.
€125,00 *
* exkl. MwSt. zzgl. Versandkosten
Already own an eMotimo Spectrum? The iFootage Shark Slider S1 + Motor Pod Bundle is a great 3rd axis accessory that comes with everything you need to connect to your Spectrum, right out of the box.
€1.090,00 *
* exkl. MwSt. zzgl. Versandkosten
For the DIY'r, these stepper motors allow you to drive a dolly ...
€128,00 *
* exkl. MwSt. zzgl. Versandkosten
MAC_SMC_EXT100 - Spectrum Motor Extension Cable - 10FT
€78,50 *
* exkl. MwSt. zzgl. Versandkosten
The eMotimo Shark S1 integration Kit includes everything you need to mount your Spectrum to your iFootage slider to create outstanding multi-axis shots
€415,00 *
* exkl. MwSt. zzgl. Versandkosten
Stepper Motor Pod for Kessler allows the spectrum ST4 to drive various Kessler sliders.
€425,00 *
* exkl. MwSt. zzgl. Versandkosten
This is an an easy and inexpensive solution for mounting the spectrum ST4 ...
€75,00 *
* exkl. MwSt. zzgl. Versandkosten
LRT Pro Timer is a small and light intervalometer with a build-in Li-Ion Battery that can be charged via USB and holds up to 20 hrs.
€298,00 *
* exkl. MwSt. zzgl. Versandkosten
Replacement ST4 Remote USB Dongle: This is a replacement USB Bluetooth module that's compatible with the Spectrum ST4.
€27,50 *
* exkl. MwSt. zzgl. Versandkosten
the Riser and Clamp are a solution for mounting the spectrum ST4 to a slider, plate ...
€85,00 *
* exkl. MwSt. zzgl. Versandkosten
* exkl. MwSt. zzgl. Versandkosten

Mission Statement

eMotimo is a small, passionate, hands-on company, driven to create the highest-value camera products on the market. We enable photographers and cinematographer of all levels, to produce their visions and capture their moments in motion!

History

eMotimo was inspired by techniques used in the filming of the documentary series, Planet Earth. How’d it all start? The founder, Brian, who has a strong background in photography and engineering, wanted to produce similar shots himself, but the technology and products on the market were too expensive and difficult to use. He set out to make his own.  eMotimo was born in 2010 and sold its first eMotimo PT in January 2011.

Values

We put a ton of our energy into creating our high-value, feature-heavy products.  We deliver what we promise.  We care deeply about customer service and the success of our users.   Our commitment to our community is long term.  We care about participation and work to have a voice in the camera/film/broadcast community.  We want to be a part of your kit – without ever locking you into a brand.  We focus on integration with other vendors.

Build quality

All eMotimo products are designed, assembled, and run through QA in our San Diego headquarters before they are shipped to you. We take a tremendous amount of pride in the quality of our products.  By assembling and testing them in our own shop, we can pay close attention to each and every part that goes out our door.

Future

We will continue to make products that push the camera/video/broadcast industry forward.  We are a team of creatives, inspired by creatives.  We are constantly evaluating new ideas and innovations to bring to our customers. We hope our products will continue to mix up the industry and enable users of all levels to do amazing things.

 

Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x